U3708 Nissan 350z OBD Code

OBD/2 U3708 error code description and symptoms.

The Transmission Fluid Pressure Switch allows the engine's control module (PCM) or Transmission Control Module (TCM) to use hydraulic fluid to engage the clutches in the transmission to allow for smoother shifting while driving. If the PCM or TCM detects an issue with the hydraulic clutch or the pressure switch, the PCM or TCM will set code U3708

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U3708 Nissan 350z Error Code Repair Process :

The rule of U3708 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of sbds interactive codes. Likewise, overriding the OBD U3708 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Nissan 350z U3708 OBD2 Code

A common cause of code U3708 is the failure of SBDS Interactive Codes, but there are several other possible causes as well, such as ;

Continuous oil flow to the VCT piston chamber
Camshaft Position Sensor harness is open or shorted
Insufficient cylinders compression
Intake Valve Timing Control Solenoid Valve harness is open or shorted

U3708 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U3708 Nissan 350z OBD Code

U3708 Nissan 350z Error Code Repair Process :

Common Causes of Nissan 350z U3708 OBD2 Code

U3708 code for other Nissan cars