U228D Mazda Drifter OBD Code

OBD/2 U228D error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

As long as the throttle plate remains closed, the idling speed and quality is controlled by the PCM via the idle control valve, and as can be seen from the above it should be clear that idle control on a gasoline engine is a complex affair. For instance, if the engine is started in sub-zero temperatures, the PCM will command the idling control valve to allow less air to enter the engine to enrich the air/fuel mixture to create a condition which is roughly analogous to how chokes worked on carburetted engines to control idling in cold weather.

U228D Mazda Drifter Error Code Repair Process :

If your speed wheel sensor lr coherency fault check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U228D and engine control unit are in charge of monitoring a bunch of different speed wheel sensor lr coherency fault, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Mazda Drifter U228D OBD2 Code

A common cause of code U228D is the failure of Speed Wheel Sensor LR Coherency Fault, but there are several other possible causes as well, such as ;

EVAP canister or fuel tank leaks
Faulty starter motor
Fuel injectors may be faulty
Fuel injectors may be faulty

U228D is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U228D Mazda Drifter OBD Code

U228D Mazda Drifter Error Code Repair Process :

Common Causes of Mazda Drifter U228D OBD2 Code

U228D code for other Mazda cars