U1245 Suzuki Sea Forenza OBD Code

OBD/2 U1245 error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U1245 Suzuki Sea Forenza Error Code Repair Process :

The rule of U1245 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of u1245 scp (j1850) invalid or missing data for interior environment. Likewise, overriding the OBD U1245 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Suzuki Sea Forenza U1245 OBD2 Code

A common cause of code U1245 is the failure of U1245 SCP (J1850) Invalid or Missing Data for Interior Environment, but there are several other possible causes as well, such as ;

EVAP canister or fuel tank leaks
Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Faulty Crankshaft Position Sensor (POS)
Foreign matter caught in fuel filler cap

U1245 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U1245 Suzuki Sea Forenza OBD Code

U1245 Suzuki Sea Forenza Error Code Repair Process :

Common Causes of Suzuki Sea Forenza U1245 OBD2 Code

U1245 code for other Suzuki cars