P0B1C Packard Super OBD Code

OBD/2 P0B1C error code description and symptoms.

Vehicle Speed Sensor (VSS) Intermittent Indicates the powertrain control module (PCM) detected an error in the vehicle speed information. Vehicle speed data is received from either the vehicle speed sensor (VSS), transfer case speed sensor (TCSS), anti-lock brake system (ABS) control module, generic electronic module (GEM), or central timer module (CTM). This DTC is set the same way as P0B1C. However, it is intended to flash the transmission control indicator lamp (TCIL) for first time VSS circuit error/malfunctions. Refer to possible causes for P0B1C

Gear changes are accomplished by a command from the TCM to energize the clutch actuator to release the clutch; after which various actuators inside the transmission disengage the current gear, and depending on current operating conditions, engage the next higher or lower gear ratio. All of this happens much faster than a human driver could change gears, and in most applications, gear changes are as smooth and seamless as on any fully automatic transmission.

P0B1C Packard Super Error Code Repair Process :

OBD P0B1C code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and driver side, while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to P0B1C malfunction without leading to an immediate increase in emissions at the tailpipe. In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for P0B1C and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.

Difficulty Level (Expert)

Repair Time (35 Min.)

Cost Prediction : $ 50-100

Common Causes of Packard Super P0B1C OBD2 Code

A common cause of code P0B1C is the failure of Driver Side, but there are several other possible causes as well, such as ;

• EVAP system hose leaking
• Faulty Camshaft Position Sensor
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Exhaust gas leaks

P0B1C is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P0B1C code for other Packard cars

You can view according P0B1C DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P0B1C Packard 12
• P0B1C Packard 120
• P0B1C Packard 200
• P0B1C Packard 300
• P0B1C Packard 400
• P0B1C Packard 7
• P0B1C Packard A
• P0B1C Packard Carribean
• P0B1C Packard Cavalier
• P0B1C Packard Clipper
• P0B1C Packard Custom
• P0B1C Packard De
• P0B1C Packard Eight
• P0B1C Packard Executive
• P0B1C Packard Mayfair
• P0B1C Packard Patrician
• P0B1C Packard Twelve
• P0B1C Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved