P0B1C Packard Clipper OBD Code

OBD/2 P0B1C error code description and symptoms.

HO2S Sensor Circuit Malfunction (HO2S-11) During testing the HO2S Heaters are checked for opens/shorts and excessive current draw.
The test fails when current draw exceeds a calibrated limit and/or an open or short is detected. Short to VPWR in harness or HO2S. Water in harness connector. Open VPWR circuit. Open GND circuit. Low battery voltage. Corrosion or poor mating terminals and wiring Damaged HO2S heater. Damaged PCM.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

P0B1C Packard Clipper Error Code Repair Process :

OBD P0B1C code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and driver side, while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to P0B1C malfunction without leading to an immediate increase in emissions at the tailpipe. In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for P0B1C and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 50-100

Common Causes of Packard Clipper P0B1C OBD2 Code

A common cause of code P0B1C is the failure of Driver Side, but there are several other possible causes as well, such as ;

• Exhaust tube
• Exhaust gas leaks
• Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
• Camshaft advance mechanism binding (VCT unit)

P0B1C is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P0B1C code for other Packard cars

You can view according P0B1C DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P0B1C Packard 12
• P0B1C Packard 120
• P0B1C Packard 200
• P0B1C Packard 300
• P0B1C Packard 400
• P0B1C Packard 7
• P0B1C Packard A
• P0B1C Packard Carribean
• P0B1C Packard Cavalier
• P0B1C Packard Custom
• P0B1C Packard De
• P0B1C Packard Eight
• P0B1C Packard Executive
• P0B1C Packard Mayfair
• P0B1C Packard Patrician
• P0B1C Packard Super
• P0B1C Packard Twelve
• P0B1C Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved