C228C Maserati Ghibli OBD Code

OBD/2 C228C error code description and symptoms.

Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle. IMRC monitor signal circuit shorted to PWR GND or SIG RTN Damaged IMRC actuator Damaged PCM An IMRCM PID reading approximately near 1 volt at closed throttle may indicate a fault.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

C228C Maserati Ghibli Error Code Repair Process :

If your a/c compressor temperature sensor malfunction check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C228C and engine control unit are in charge of monitoring a bunch of different a/c compressor temperature sensor malfunction, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Maserati Ghibli C228C OBD2 Code

A common cause of code C228C is the failure of A/C Compressor Temperature Sensor Malfunction, but there are several other possible causes as well, such as ;

1Camshaft Position Sensor circuit poor electrical connection
Engine Control Module (ECM)
Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
Intake air leaks

C228C is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C228C Maserati Ghibli OBD Code

C228C Maserati Ghibli Error Code Repair Process :

Common Causes of Maserati Ghibli C228C OBD2 Code

C228C code for other Maserati cars