DF214 Talbot Rapier OBD Code

OBD/2 DF214 error code description and symptoms.

The Transmission Fluid Pressure Switch allows the engine's control module (PCM) or Transmission Control Module (TCM) to use hydraulic fluid to engage the clutches in the transmission to allow for smoother shifting while driving. If the PCM or TCM detects an issue with the hydraulic clutch or the pressure switch, the PCM or TCM will set code DF214

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

DF214 Talbot Rapier Error Code Repair Process :

The scent may DF214 signal oil or coolant leaking from their normally closed-loop systems, or it may indicate dangerous exhaust gases invading your car's interior. Car and truck exhaust contains toxic gases such DF214, so if the inside of your car scp (j1850) invalid or missing data for primary id / vehicle speed as if you were standing behind your car, get out and get it fixed. Fight the urge to take a little nap first. So sleepy. That's the carbon monoxide talking, friends. At least open a window on your way to the shop.

Common Causes of Talbot Rapier DF214 OBD2 Code

A common cause of code DF214 is the failure of SCP (J1850) Invalid or Missing Data for Primary Id / Vehicle Speed, but there are several other possible causes as well, such as ;

Continuous oil flow to the VCT piston chamber
Faulty oil control valve (OCV)
EVAP system hose leaking
Oil flow restriction in the oil passages or the VCT valve body

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

DF214 Talbot Rapier OBD Code

DF214 Talbot Rapier Error Code Repair Process :

Common Causes of Talbot Rapier DF214 OBD2 Code

DF214 code for other Talbot cars