U3910 Austin A40 OBD Code

OBD/2 U3910 error code description and symptoms.

Brake Switch Circuit Input Malfunction Indicates PCM did not receive a brake pedal position (BPP) input. Open or short in BPP circuit Open or short in stoplamp circuits Damaged PCM Malfunction in module(s) connected to BPP circuit. (Rear Electronic Module [REM] Windstar and LS6/LS8 or Lighting Control Module (LCM) Continental and Town Car. Damaged brake switch Misadjusted brake switch Check for proper function of stoplamps.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U3910 Austin A40 Error Code Repair Process :

If your transmission automatic hall effect sensor power circuit failure check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U3910 and engine control unit are in charge of monitoring a bunch of different transmission automatic hall effect sensor power circuit failure, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Austin A40 U3910 OBD2 Code

A common cause of code U3910 is the failure of Transmission Automatic Hall Effect Sensor Power Circuit Failure, but there are several other possible causes as well, such as ;

Failures of clutch motion/travel sensors.
EVAP canister or fuel tank leaks
Faulty variable valve timing (VVT)
Fuel injectors harness is open or shorted

U3910 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U3910 Austin A40 OBD Code

U3910 Austin A40 Error Code Repair Process :

Common Causes of Austin A40 U3910 OBD2 Code

U3910 code for other Austin cars