U3585 Mitsubishi Raider OBD Code

OBD/2 U3585 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

As long as the throttle plate remains closed, the idling speed and quality is controlled by the PCM via the idle control valve, and as can be seen from the above it should be clear that idle control on a gasoline engine is a complex affair. For instance, if the engine is started in sub-zero temperatures, the PCM will command the idling control valve to allow less air to enter the engine to enrich the air/fuel mixture to create a condition which is roughly analogous to how chokes worked on carburetted engines to control idling in cold weather.

U3585 Mitsubishi Raider Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine U3585 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If unable to bleed up fuel tank vacuum so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the unable to bleed up fuel tank vacuum.

Common Causes of Mitsubishi Raider U3585 OBD2 Code

A common cause of code U3585 is the failure of Unable To Bleed Up Fuel Tank Vacuum, but there are several other possible causes as well, such as ;

Camshaft Position Sensor harness is open or shorted
Faulty oil control valve (OCV)
Damaged VCT phaser
Faulty front heated oxygen sensor

U3585 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U3585 Mitsubishi Raider OBD Code

U3585 Mitsubishi Raider Error Code Repair Process :

Common Causes of Mitsubishi Raider U3585 OBD2 Code

U3585 code for other Mitsubishi cars