U3508 Innocenti Elba OBD Code

OBD/2 U3508 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U3508 Innocenti Elba Error Code Repair Process :

If your ignition spare check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U3508 and engine control unit are in charge of monitoring a bunch of different ignition spare, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Innocenti Elba U3508 OBD2 Code

A common cause of code U3508 is the failure of Ignition Spare, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Faulty select solenoid
• Clogged or faulty fuel injector (s)
• Fuel injectors harness is open or shorted

U3508 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U3508 code for other Innocenti cars

You can view according U3508 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U3508 Innocenti 1100
• U3508 Innocenti 186
• U3508 Innocenti 650
• U3508 Innocenti 950
• U3508 Innocenti 990
• U3508 Innocenti A40
• U3508 Innocenti C
• U3508 Innocenti Im3
• U3508 Innocenti J4
• U3508 Innocenti Koral
• U3508 Innocenti Mille
• U3508 Innocenti Mini
• U3508 Innocenti Small
• U3508 Innocenti Turbo

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved