U3453 Suzuki Gsx OBD Code

OBD/2 U3453 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

As the engine heats up and combustion becomes easier and more complete, the PCM will command the idling control valve to increase the amount of air entering the engine to suit the changing conditions. However, when the load on the engine changes, say, when some electrical consumers or other systems are either turned on or off, the PCM adapts the signal voltage to the idle control valve to ensure that the idling speed remains stable, and at the RPM specified by the manufacturer.

U3453 Suzuki Gsx Error Code Repair Process :

The rule of U3453 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of injection control pressure out of range low. Likewise, overriding the OBD U3453 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Suzuki Gsx U3453 OBD2 Code

A common cause of code U3453 is the failure of Injection Control Pressure Out Of Range Low, but there are several other possible causes as well, such as ;

Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor harness is open or shorted
Fuel injectors harness is open or shorted
Fuel Injectors circuit poor electrical connection

U3453 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U3453 Suzuki Gsx OBD Code

U3453 Suzuki Gsx Error Code Repair Process :

Common Causes of Suzuki Gsx U3453 OBD2 Code

U3453 code for other Suzuki cars