U3021 Dodge Omni OBD Code

OBD/2 U3021 error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

U3021 Dodge Omni Error Code Repair Process :

If your crankshaft position sensor a circuit range/performance check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U3021 and engine control unit are in charge of monitoring a bunch of different crankshaft position sensor a circuit range/performance, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Dodge Omni U3021 OBD2 Code

A common cause of code U3021 is the failure of Crankshaft Position Sensor A Circuit Range/Performance, but there are several other possible causes as well, such as ;

EVAP canister or fuel tank leaks
Faulty Variable Camshaft Timing (VCT) position solenoid
Incorrect fuel pressure
Faulty Air fuel ratio (A/F) Sensor 1 Bank 1

U3021 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U3021 Dodge Omni OBD Code

U3021 Dodge Omni Error Code Repair Process :

Common Causes of Dodge Omni U3021 OBD2 Code

U3021 code for other Dodge cars