U2406 Fiat 1300 OBD Code

OBD/2 U2406 error code description and symptoms.

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U2406 Fiat 1300 Error Code Repair Process :

The rule of U2406 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of incorrect module design level. Likewise, overriding the OBD U2406 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Fiat 1300 U2406 OBD2 Code

A common cause of code U2406 is the failure of Incorrect Module Design Level, but there are several other possible causes as well, such as ;

Damaged ECM
Faulty select solenoid
Faulty Crankshaft Position Sensor (POS)
Faulty oil control valve (OCV)

U2406 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U2406 Fiat 1300 OBD Code

U2406 Fiat 1300 Error Code Repair Process :

Common Causes of Fiat 1300 U2406 OBD2 Code

U2406 code for other Fiat cars