U2038 Suzuki C2 OBD Code

OBD/2 U2038 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

U2038 Suzuki C2 Error Code Repair Process :

If your throttle position input out of range low check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U2038 and engine control unit are in charge of monitoring a bunch of different throttle position input out of range low, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Suzuki C2 U2038 OBD2 Code

A common cause of code U2038 is the failure of Throttle Position Input Out of Range Low, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Engine Control Module (ECM)
Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
Camshaft Position Sensor harness is open or shorted

U2038 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U2038 Suzuki C2 OBD Code

U2038 Suzuki C2 Error Code Repair Process :

Common Causes of Suzuki C2 U2038 OBD2 Code

U2038 code for other Suzuki cars