U196E Suzuki Alto OBD Code

OBD/2 U196E error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code U196E, so consult the manual to locate the brake fluid reservoir. Bear in mind that a low fluid level can set code U196E on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

U196E Suzuki Alto Error Code Repair Process :

If your check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U196E and engine control unit are in charge of monitoring a bunch of different , and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Suzuki Alto U196E OBD2 Code

A common cause of code U196E is the failure of , but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
EVAP canister or fuel tank leaks
Fuel Injectors circuit poor electrical connection
Incorrect fuel filler cap used

U196E is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U196E Suzuki Alto OBD Code

U196E Suzuki Alto Error Code Repair Process :

Common Causes of Suzuki Alto U196E OBD2 Code

U196E code for other Suzuki cars