U1482 Trouble Code

View U1482 obd/2 error code description and symptoms. U1482 engine photo

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

U1482 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine U1482 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If passenger power window motor circuit open so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the passenger power window motor circuit open.

U1482 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Common Causes of U1482

A common cause of code U1482 is the failure of Passenger Power Window Motor Circuit Open, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Continuous oil flow to the VCT piston chamber
Ignition coils harness is open or shorted
Faulty oil control valve (OCV)

U1482 code for all cars

You can view according U1482 DTC for your car model. We selected several models to see obd2 solutions click and view it.

+U1482 Zagato Bravo

+U1482 Honda Saber

+U1482 Bentley Brooklands

+U1482 Volvo Volvo

+U1482 Daihatsu Muse

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy