U1109 Packard Custom OBD Code

OBD/2 U1109 error code description and symptoms.

Brake Switch Circuit Input Malfunction Indicates PCM did not receive a brake pedal position (BPP) input. Open or short in BPP circuit Open or short in stoplamp circuits Damaged PCM Malfunction in module(s) connected to BPP circuit. (Rear Electronic Module [REM] Windstar and LS6/LS8 or Lighting Control Module (LCM) Continental and Town Car. Damaged brake switch Misadjusted brake switch Check for proper function of stoplamps.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U1109 Packard Custom Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine U1109 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If u1109 scp (j1850) invalid or missing data for electric traction drive (inverter) so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the u1109 scp (j1850) invalid or missing data for electric traction drive (inverter).

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Packard Custom U1109 OBD2 Code

A common cause of code U1109 is the failure of U1109 SCP (J1850) Invalid or Missing Data for Electric Traction Drive (Inverter), but there are several other possible causes as well, such as ;

• Failures of clutch motion/travel sensors.
• Faulty front heated oxygen sensor
• Exhaust tube
• Incorrect fuel filler cap used

U1109 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U1109 code for other Packard cars

You can view according U1109 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U1109 Packard 12
• U1109 Packard 120
• U1109 Packard 200
• U1109 Packard 300
• U1109 Packard 400
• U1109 Packard 7
• U1109 Packard A
• U1109 Packard Carribean
• U1109 Packard Cavalier
• U1109 Packard Clipper
• U1109 Packard De
• U1109 Packard Eight
• U1109 Packard Executive
• U1109 Packard Mayfair
• U1109 Packard Patrician
• U1109 Packard Super
• U1109 Packard Twelve
• U1109 Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved