U1024 Hyundai Tuscon OBD Code

OBD/2 U1024 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

U1024 Hyundai Tuscon Error Code Repair Process :

For u1024 scp (j1850) invalid or missing data for primary id check engine light is perhaps the most troubling of lights because it could mean so many different things, from you didn't screw the gas cap on tightly enough to look out for pistons flying through the hood and into the stratosphere. The easiest way to find out what this light is telling you is to hook your vehicle up to a scan tool. U1024 error code diagnostic tool looks a little like an oversized calculator and plugs into a communication port inside the car. After you instruct it to perform the scan, it speaks u1024 scp (j1850) invalid or missing data for primary id with your car's computers to find out exactly what's prompting the light to turn on.

Common Causes of Hyundai Tuscon U1024 OBD2 Code

A common cause of code U1024 is the failure of U1024 SCP (J1850) Invalid or Missing Data for Primary Id, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Faulty Crankshaft Position Sensor (POS)
Camshaft advance mechanism binding (VCT unit)
Faulty ignition coil (s)

U1024 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U1024 Hyundai Tuscon OBD Code

U1024 Hyundai Tuscon Error Code Repair Process :

Common Causes of Hyundai Tuscon U1024 OBD2 Code

U1024 code for other Hyundai cars