U0923 Nissan R300 OBD Code

OBD/2 U0923 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

U0923 Nissan R300 Error Code Repair Process :

If your a/c pressure sensor insufficient pressure change check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U0923 and engine control unit are in charge of monitoring a bunch of different a/c pressure sensor insufficient pressure change, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Nissan R300 U0923 OBD2 Code

A common cause of code U0923 is the failure of A/C Pressure Sensor Insufficient Pressure Change, but there are several other possible causes as well, such as ;

Camshaft Position Sensor harness is open or shorted
Clogged or faulty fuel injector (s)
Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
Spark plugs may be faulty

U0923 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U0923 Nissan R300 OBD Code

U0923 Nissan R300 Error Code Repair Process :

Common Causes of Nissan R300 U0923 OBD2 Code

U0923 code for other Nissan cars