U0851 Honda J-vx OBD Code

OBD/2 U0851 error code description and symptoms.

Mass Air Flow (MAF) Sensor Intermittent The MAF sensor circuit is monitored by the PCM for sudden voltage (or air flow) input change through the comprehensive component monitor (CCM). If during the last 40 warm-up cycles in key ON engine running the PCM detects a voltage (or air flow) change beyond the minimum or maximum calibrated limit, a continuous memory diagnostic trouble code (DTC) is stored.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

U0851 Honda J-vx Error Code Repair Process :

The rule of U0851 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of variable cam timing solenoid b malfunction. Likewise, overriding the OBD U0851 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Honda J-vx U0851 OBD2 Code

A common cause of code U0851 is the failure of Variable Cam Timing Solenoid B Malfunction, but there are several other possible causes as well, such as ;

Damaged camshaft position (CMP) sensor
EVAP system hose leaking
Faulty Crankshaft Position Sensor (POS)
Open or short in the CMP sensor circuits

U0851 is a kind of Network Trouble Code

U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

U0851 Honda J-vx OBD Code

U0851 Honda J-vx Error Code Repair Process :

Common Causes of Honda J-vx U0851 OBD2 Code

U0851 code for other Honda cars