U0680 Land Rover Evoque OBD Code

OBD/2 U0680 error code description and symptoms.

Brake Switch Circuit Input Malfunction Indicates PCM did not receive a brake pedal position (BPP) input. Open or short in BPP circuit Open or short in stoplamp circuits Damaged PCM Malfunction in module(s) connected to BPP circuit. (Rear Electronic Module [REM] Windstar and LS6/LS8 or Lighting Control Module (LCM) Continental and Town Car. Damaged brake switch Misadjusted brake switch Check for proper function of stoplamps.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

U0680 Land Rover Evoque Error Code Repair Process :

If your cam calibration fault check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U0680 and engine control unit are in charge of monitoring a bunch of different cam calibration fault, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Expert)

Repair Time (35 Min.)

Cost Prediction : $ 40-75

Common Causes of Land Rover Evoque U0680 OBD2 Code

A common cause of code U0680 is the failure of Cam Calibration Fault, but there are several other possible causes as well, such as ;

• Failures of clutch motion/travel sensors.
• Faulty spark plug (s)
• Ignition misfiring
• Erratic camshaft position due to low oil pressure

U0680 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U0680 code for other Land cars

You can view according U0680 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U0680 Land Rover Defender
• U0680 Land Rover Discovery
• U0680 Land Rover Discovery 2
• U0680 Land Rover Discovery 3
• U0680 Land Rover Discovery 4
• U0680 Land Rover Discovery 5
• U0680 Land Rover Freelander
• U0680 Land Rover Freelander 2
• U0680 Land Rover Lr2
• U0680 Land Rover Lr3
• U0680 Land Rover Range Rover
• U0680 Land Rover Serie I
• U0680 Land Rover Series I
• U0680 Land Rover Series Ii
• U0680 Land Rover Series Iii
• U0680 Land Rover Velar

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved