P724A Packard Twelve OBD Code

OBD/2 P724A error code description and symptoms.

The input turbine speed sensor detects rotation of the input shaft of the input shaft speed sensor transmission. The computer uses that information, along with the output shaft speed sensor to determine if the transmission is operating according to plan. If the computer detects a difference between the input shaft speed , and the expected output shaft speed, it will adjust transmission pump pressure to prevent clutch disc slip. If adding pressure doesn't solve the problem, it will set a trouble code.

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code P724A, so consult the manual to locate the brake fluid reservoir. Bear in mind that a low fluid level can set code P724A on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

P724A Packard Twelve Error Code Repair Process :

If your vehicle failed a P724A test and the P724A Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look : Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 20-50

Common Causes of Packard Twelve P724A OBD2 Code

A common cause of code P724A is the failure of , but there are several other possible causes as well, such as ;

• Faulty Air Flow Meter
• Faulty ignition coil (s)
• Camshaft advance mechanism binding (VCT unit)
• Fuel filler cap remains open or fails to close

P724A is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P724A code for other Packard cars

You can view according P724A DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P724A Packard 12
• P724A Packard 120
• P724A Packard 200
• P724A Packard 300
• P724A Packard 400
• P724A Packard 7
• P724A Packard A
• P724A Packard Carribean
• P724A Packard Cavalier
• P724A Packard Clipper
• P724A Packard Custom
• P724A Packard De
• P724A Packard Eight
• P724A Packard Executive
• P724A Packard Mayfair
• P724A Packard Patrician
• P724A Packard Super
• P724A Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved