P2744 Trouble Code

View P2744 obd/2 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

P2744 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P2744 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p2744 transmission fluid temperature sensor b circuit intermittent so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p2744 transmission fluid temperature sensor b circuit intermittent.

P2744 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Common Causes of P2744

A common cause of code P2744 is the failure of P2744 Transmission Fluid Temperature Sensor B Circuit Intermittent, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Faulty select solenoid
• Exhaust gas leaks
• Variable Camshaft Timing solenoid stuck open

P2744 code for all cars

You can view according P2744 DTC for your car model. We selected several models to see obd2 solutions click and view it.

+P2744 Mercedes-benz 219

+P2744 Volkswagen 1-litre

+P2744 Triumph Gt6

+P2744 Mean Sonora

+P2744 Toyota Avallon

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved