P2711 Jaguar Xe OBD Code

OBD/2 P2711 error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

As the engine heats up and combustion becomes easier and more complete, the PCM will command the idling control valve to increase the amount of air entering the engine to suit the changing conditions. However, when the load on the engine changes, say, when some electrical consumers or other systems are either turned on or off, the PCM adapts the signal voltage to the idle control valve to ensure that the idling speed remains stable, and at the RPM specified by the manufacturer.

P2711 Jaguar Xe Error Code Repair Process :

If your p2711 unexpected mechanical gear disengagement check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P2711 and engine control unit are in charge of monitoring a bunch of different p2711 unexpected mechanical gear disengagement, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Jaguar Xe P2711 OBD2 Code

A common cause of code P2711 is the failure of P2711 Unexpected Mechanical Gear Disengagement, but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
Faulty Camshaft Position Sensor
Faulty oil control valve (OCV)

P2711 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P2711 Jaguar Xe OBD Code

P2711 Jaguar Xe Error Code Repair Process :

Common Causes of Jaguar Xe P2711 OBD2 Code

P2711 code for other Jaguar cars