P247E Mercedes S 63 OBD Code

OBD/2 P247E error code description and symptoms.

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. Cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) P247E DTC is a check of the VCT unit.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

P247E Mercedes S 63 Error Code Repair Process :

The rule of P247E code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of p247e exhaust gas temperature out of range bank 2 sensor 3. Likewise, overriding the OBD P247E error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Mercedes S 63 P247E OBD2 Code

A common cause of code P247E is the failure of P247E Exhaust Gas Temperature Out of Range Bank 2 Sensor 3, but there are several other possible causes as well, such as ;

Camshaft advance mechanism binding (VCT unit)
EVAP system hose leaking
Camshaft advance mechanism binding (VCT unit)
Oil Control Valve (OCV) circuit is open or shorted

P247E is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P247E Mercedes S 63 OBD Code

P247E Mercedes S 63 Error Code Repair Process :

Common Causes of Mercedes S 63 P247E OBD2 Code

P247E code for other Mercedes cars