P247D Rover Range Rover OBD Code

OBD/2 P247D error code description and symptoms.

EGR Flow Insufficient Detected The EGR system is monitored during steady state driving conditions while the EGR is commanded on.
The test fails when the signal from the DPF EGR sensor indicates that EGR flow is less than the desired minimum. Vacuum supply EGR valve stuck closed EGR valve leaks vacuum EGR flow path restricted EGRVR circuit shorted to PWR VREF open to D.P.F. EGR sensor D.P.F. EGR sensor downstream hose off or plugged EGRVR circuit open to PCM VPWR open to EGRVR solenoid D.P.F. EGR sensor hoses both off D.P.F. EGR sensor hoses reversed Damaged EGR orifice tube Damaged EGRVR solenoid Damaged PCM Perform KOER self-test and look for DTC P247D as an indication of a hard fault.

Gear changes are accomplished by a command from the TCM to energize the clutch actuator to release the clutch; after which various actuators inside the transmission disengage the current gear, and depending on current operating conditions, engage the next higher or lower gear ratio. All of this happens much faster than a human driver could change gears, and in most applications, gear changes are as smooth and seamless as on any fully automatic transmission.

P247D Rover Range Rover Error Code Repair Process :

If your p247d exhaust gas temperature out of range bank 2 sensor 2 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P247D and engine control unit are in charge of monitoring a bunch of different p247d exhaust gas temperature out of range bank 2 sensor 2, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Rover Range Rover P247D OBD2 Code

A common cause of code P247D is the failure of P247D Exhaust Gas Temperature Out of Range Bank 2 Sensor 2, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
Faulty Camshaft Position Sensor
Faulty Air Flow Meter
Faulty Variable Camshaft Timing (VCT) position solenoid

P247D is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P247D Rover Range Rover OBD Code

P247D Rover Range Rover Error Code Repair Process :

Common Causes of Rover Range Rover P247D OBD2 Code

P247D code for other Rover cars