P246A Land Rover Evoque OBD Code

OBD/2 P246A error code description and symptoms.

The Transmission Fluid Pressure Switch allows the engine's control module (PCM) or Transmission Control Module (TCM) to use hydraulic fluid to engage the clutches in the transmission to allow for smoother shifting while driving. If the PCM or TCM detects an issue with the hydraulic clutch or the pressure switch, the PCM or TCM will set code P246A

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

P246A Land Rover Evoque Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P246A light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p246a exhaust gas temperature sensor circuit intermittent/erratic bank 2 sensor 3 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p246a exhaust gas temperature sensor circuit intermittent/erratic bank 2 sensor 3.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 30-110

Common Causes of Land Rover Evoque P246A OBD2 Code

A common cause of code P246A is the failure of P246A Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 3, but there are several other possible causes as well, such as ;

• Continuous oil flow to the VCT piston chamber
• Faulty Intake Valve Timing Control Solenoid Valve
• Clogged or faulty fuel injector (s)
• Faulty select solenoid

P246A is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P246A code for other Land cars

You can view according P246A DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P246A Land Rover Defender
• P246A Land Rover Discovery
• P246A Land Rover Discovery 2
• P246A Land Rover Discovery 3
• P246A Land Rover Discovery 4
• P246A Land Rover Discovery 5
• P246A Land Rover Freelander
• P246A Land Rover Freelander 2
• P246A Land Rover Lr2
• P246A Land Rover Lr3
• P246A Land Rover Range Rover
• P246A Land Rover Serie I
• P246A Land Rover Series I
• P246A Land Rover Series Ii
• P246A Land Rover Series Iii
• P246A Land Rover Velar

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved