P211C Mazda Rx-evolv OBD Code

OBD/2 P211C error code description and symptoms.

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

P211C Mazda Rx-evolv Error Code Repair Process :

If your vehicle failed a P211C test and the P211C Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses fts low - fuel pump temperature sensor low a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look fts low - fuel pump temperature sensor low: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Common Causes of Mazda Rx-evolv P211C OBD2 Code

A common cause of code P211C is the failure of FTS Low - Fuel Pump Temperature Sensor Low, but there are several other possible causes as well, such as ;

Damaged ECM
Faulty Variable Camshaft Timing (VCT) position solenoid
Engine Control Module (ECM)
EVAP system hose leaking

P211C is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P211C Mazda Rx-evolv OBD Code

P211C Mazda Rx-evolv Error Code Repair Process :

Common Causes of Mazda Rx-evolv P211C OBD2 Code

P211C code for other Mazda cars