P2007 Simca 1309 OBD Code

OBD/2 P2007 error code description and symptoms.

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

Circuit High Input codes like P2007 are mostly caused by defective alternators that develop excessive voltages, although there may be other causes as well, such as short circuits that 'leak' current into a particular system from other, unrelated systems that work on higher voltages. Note that in the case of short circuits that leak power into a control circuit, there is likely to be other, seemingly unrelated trouble codes present along with the code(s) being investigated. Diagnosing a 'high input' code will always involve a thorough testing of the charging system as a first step, followed by measures to isolate the system from all other possible sources of power during resistance, continuity, and reference voltage tests.

P2007 Simca 1309 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P2007 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p2007 intake manifold runner control stuck closed bank 2 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p2007 intake manifold runner control stuck closed bank 2.

Difficulty Level (Easy)

Repair Time (45 Min.)

Cost Prediction : $ 75-90

Common Causes of Simca 1309 P2007 OBD2 Code

A common cause of code P2007 is the failure of P2007 Intake Manifold Runner Control Stuck Closed Bank 2, but there are several other possible causes as well, such as ;

• Damaged ECM
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Fuel injectors harness is open or shorted
• Ignition coils harness is open or shorted

P2007 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P2007 code for other Simca cars

You can view according P2007 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P2007 Simca 1000
• P2007 Simca 11
• P2007 Simca 1100
• P2007 Simca 1200
• P2007 Simca 1300
• P2007 Simca 1301
• P2007 Simca 1307
• P2007 Simca 1308
• P2007 Simca 1500
• P2007 Simca 1501
• P2007 Simca 2 Litres
• P2007 Simca 5
• P2007 Simca 6
• P2007 Simca 8
• P2007 Simca Ariane
• P2007 Simca Aronde
• P2007 Simca Horizon
• P2007 Simca Montlhery
• P2007 Simca Oceane
• P2007 Simca Plein
• P2007 Simca Plein Ceil
• P2007 Simca Tufao
• P2007 Simca Type 11
• P2007 Simca Vedette
• P2007 Simca Vedette Beaulieu
• P2007 Simca Vedette Marly
• P2007 Simca Vedette Versailles

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved