P1917 Packard Super OBD Code

OBD/2 P1917 error code description and symptoms.

EGR Flow Insufficient Detected The EGR system is monitored during steady state driving conditions while the EGR is commanded on.
The test fails when the signal from the DPF EGR sensor indicates that EGR flow is less than the desired minimum. Vacuum supply EGR valve stuck closed EGR valve leaks vacuum EGR flow path restricted EGRVR circuit shorted to PWR VREF open to D.P.F. EGR sensor D.P.F. EGR sensor downstream hose off or plugged EGRVR circuit open to PCM VPWR open to EGRVR solenoid D.P.F. EGR sensor hoses both off D.P.F. EGR sensor hoses reversed Damaged EGR orifice tube Damaged EGRVR solenoid Damaged PCM Perform KOER self-test and look for DTC P1917 as an indication of a hard fault.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

P1917 Packard Super Error Code Repair Process :

The rule of P1917 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of p1917 high clutch drum speed sensor intermittent. Likewise, overriding the OBD P1917 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 60-110

Common Causes of Packard Super P1917 OBD2 Code

A common cause of code P1917 is the failure of P1917 High Clutch Drum Speed Sensor Intermittent, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Faulty Crankshaft Position Sensor (POS)
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection

P1917 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P1917 code for other Packard cars

You can view according P1917 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P1917 Packard 12
• P1917 Packard 120
• P1917 Packard 200
• P1917 Packard 300
• P1917 Packard 400
• P1917 Packard 7
• P1917 Packard A
• P1917 Packard Carribean
• P1917 Packard Cavalier
• P1917 Packard Clipper
• P1917 Packard Custom
• P1917 Packard De
• P1917 Packard Eight
• P1917 Packard Executive
• P1917 Packard Mayfair
• P1917 Packard Patrician
• P1917 Packard Twelve
• P1917 Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved