P1462 Mitsubishi Concept OBD Code

OBD/2 P1462 error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

P1462 Mitsubishi Concept Error Code Repair Process :

If your p1462 a/c pressure sensor circuit voltage high check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P1462 and engine control unit are in charge of monitoring a bunch of different p1462 a/c pressure sensor circuit voltage high, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Mitsubishi Concept P1462 OBD2 Code

A common cause of code P1462 is the failure of P1462 A/C Pressure Sensor Circuit Voltage High, but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
Faulty TCM or TCM programming
Foreign matter caught in fuel filler cap
Engine Control Module (ECM)

P1462 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P1462 Mitsubishi Concept OBD Code

P1462 Mitsubishi Concept Error Code Repair Process :

Common Causes of Mitsubishi Concept P1462 OBD2 Code

P1462 code for other Mitsubishi cars