P1441 Volkswagen 1300 OBD Code

OBD/2 P1441 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

P1441 Volkswagen 1300 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P1441 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p1441 evaporative emission control system leak so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p1441 evaporative emission control system leak.

Common Causes of Volkswagen 1300 P1441 OBD2 Code

A common cause of code P1441 is the failure of P1441 Evaporative Emission Control System Leak, but there are several other possible causes as well, such as ;

Camshaft Position Sensor harness is open or shorted
EVAP system hose leaking
Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
Incorrect Positive Crankcase Ventilation (PCV) hose connection

P1441 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P1441 Volkswagen 1300 OBD Code

P1441 Volkswagen 1300 Error Code Repair Process :

Common Causes of Volkswagen 1300 P1441 OBD2 Code

P1441 code for other Volkswagen cars