P13A2 Proton Saloon OBD Code

OBD/2 P13A2 error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

Gear changes are accomplished by a command from the TCM to energize the clutch actuator to release the clutch; after which various actuators inside the transmission disengage the current gear, and depending on current operating conditions, engage the next higher or lower gear ratio. All of this happens much faster than a human driver could change gears, and in most applications, gear changes are as smooth and seamless as on any fully automatic transmission.

P13A2 Proton Saloon Error Code Repair Process :

OBD P13A2 code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and , while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to P13A2 malfunction without leading to an immediate increase in emissions at the tailpipe. In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for P13A2 and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.

Difficulty Level (Expert)

Repair Time (35 Min.)

Cost Prediction : $ 50-100

Common Causes of Proton Saloon P13A2 OBD2 Code

A common cause of code P13A2 is the failure of , but there are several other possible causes as well, such as ;

• EVAP canister or fuel tank leaks
• Faulty Camshaft Position Sensor
• Fuel tank leaking
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection

P13A2 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P13A2 code for other Proton cars

You can view according P13A2 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P13A2 Proto Spirra
• P13A2 Proton 300
• P13A2 Proton 400
• P13A2 Proton Arena
• P13A2 Proton Gen
• P13A2 Proton Gen2
• P13A2 Proton Impian
• P13A2 Proton Inspira
• P13A2 Proton Juara
• P13A2 Proton Perdana
• P13A2 Proton Persona
• P13A2 Proton Preve
• P13A2 Proton Putra
• P13A2 Proton Saga Flx
• P13A2 Proton Satria
• P13A2 Proton Savvy
• P13A2 Proton Tiara
• P13A2 Proton Waja
• P13A2 Proton Wira

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved