P1006 Lamborghini Marco OBD Code

OBD/2 P1006 error code description and symptoms.

EGR Flow Insufficient Detected The EGR system is monitored during steady state driving conditions while the EGR is commanded on.
The test fails when the signal from the DPF EGR sensor indicates that EGR flow is less than the desired minimum. Vacuum supply EGR valve stuck closed EGR valve leaks vacuum EGR flow path restricted EGRVR circuit shorted to PWR VREF open to D.P.F. EGR sensor D.P.F. EGR sensor downstream hose off or plugged EGRVR circuit open to PCM VPWR open to EGRVR solenoid D.P.F. EGR sensor hoses both off D.P.F. EGR sensor hoses reversed Damaged EGR orifice tube Damaged EGRVR solenoid Damaged PCM Perform KOER self-test and look for DTC P1006 as an indication of a hard fault.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

P1006 Lamborghini Marco Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P1006 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If abs system is not operational so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the abs system is not operational.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Lamborghini Marco P1006 OBD2 Code

A common cause of code P1006 is the failure of ABS System Is Not Operational, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Faulty front heated oxygen sensor
• Exhaust tube
• Faulty Variable Camshaft Timing (VCT) position solenoid

P1006 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P1006 code for other Lamborghini cars

You can view according P1006 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P1006 Lamborghini 350
• P1006 Lamborghini 400
• P1006 Lamborghini Bravo
• P1006 Lamborghini Cala
• P1006 Lamborghini Concept
• P1006 Lamborghini Countach
• P1006 Lamborghini Diablo
• P1006 Lamborghini Espada
• P1006 Lamborghini Flying Star
• P1006 Lamborghini Gallardo
• P1006 Lamborghini Gallardo Lp560
• P1006 Lamborghini Gallordo
• P1006 Lamborghini Islero
• P1006 Lamborghini Jalpa
• P1006 Lamborghini Jarama
• P1006 Lamborghini Lm
• P1006 Lamborghini Marzal
• P1006 Lamborghini Miura
• P1006 Lamborghini Murcielago
• P1006 Lamborghini Nomad
• P1006 Lamborghini P
• P1006 Lamborghini P140
• P1006 Lamborghini Portofino
• P1006 Lamborghini Reventon
• P1006 Lamborghini Urraco

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved