P0B1C Land Rover Evoque OBD Code

OBD/2 P0B1C error code description and symptoms.

Throttle Position (TP) Sensor Intermittent The TP sensor circuit is monitored by the PCM for sudden TP rotation angle (or voltage) input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON engine running the PCM detects a TP rotation angle (or voltage) changes beyond the minimum or maximum calibrated limit, a continuous diagnostic trouble code (DTC) is stored. Poor continuity through the TP sensor connectors Poor continuity through the TP harness Intermittent open or short inside the TP sensor While accessing the TP V PID on the scan tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness.

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code P0B1C, so consult the manual to locate the brake fluid reservoir. Bear in mind that a low fluid level can set code P0B1C on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

P0B1C Land Rover Evoque Error Code Repair Process :

If your driver side check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P0B1C and engine control unit are in charge of monitoring a bunch of different driver side, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Land Rover Evoque P0B1C OBD2 Code

A common cause of code P0B1C is the failure of Driver Side, but there are several other possible causes as well, such as ;

• Damaged VCT phaser
• Camshaft Position Sensor harness is open or shorted
• Fuel filler cap remains open or fails to close
• Oil Control Valve (OCV) circuit is open or shorted

P0B1C is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P0B1C code for other Land cars

You can view according P0B1C DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P0B1C Land Rover Defender
• P0B1C Land Rover Discovery
• P0B1C Land Rover Discovery 2
• P0B1C Land Rover Discovery 3
• P0B1C Land Rover Discovery 4
• P0B1C Land Rover Discovery 5
• P0B1C Land Rover Freelander
• P0B1C Land Rover Freelander 2
• P0B1C Land Rover Lr2
• P0B1C Land Rover Lr3
• P0B1C Land Rover Range Rover
• P0B1C Land Rover Serie I
• P0B1C Land Rover Series I
• P0B1C Land Rover Series Ii
• P0B1C Land Rover Series Iii
• P0B1C Land Rover Velar

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved