P0962 Trouble Code

View P0962 obd/2 error code description and symptoms. P0962 engine photo

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

P0962 Error Code Repair Process :

If your p0962 pressure control solenoid a control circuit low check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P0962 and engine control unit are in charge of monitoring a bunch of different p0962 pressure control solenoid a control circuit low, and if they get a reading that's a little out of whack, up pops the check engine light.

P0962 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Common Causes of P0962

A common cause of code P0962 is the failure of P0962 Pressure Control Solenoid A Control Circuit Low, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Faulty TCM or TCM programming
Faulty starter motor
Internal electrical failures in actuator motors/solenoids.

P0962 code for all cars

You can view according P0962 DTC for your car model. We selected several models to see obd2 solutions click and view it.

+P0962 Seat 1500

+P0962 Chenard Walcker 10

+P0962 Cunningham C3

+P0962 Cottin-desgouttes 12

+P0962 Nissan 370z

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy