P006F Humber 20 OBD Code

OBD/2 P006F error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

Regardless of the design though, the purpose of all clutch actuating systems is to improve the driving experience by removing the need for manual clutch operation by the driver. Computer-controlled clutch actuating systems work particularly well in dual clutch systems where one clutch controls gear changes of even-numbered gear ratios, and a second clutch that controls gear changes of odd-numbered ratios.

P006F Humber 20 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P006F light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If scp (j1850) invalid or missing data for primary id so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the scp (j1850) invalid or missing data for primary id.

Difficulty Level (Easy)

Repair Time (45 Min.)

Cost Prediction : $ 75-90

Common Causes of Humber 20 P006F OBD2 Code

A common cause of code P006F is the failure of SCP (J1850) Invalid or Missing Data for Primary Id, but there are several other possible causes as well, such as ;

• EVAP canister or fuel tank leaks
• Faulty oil control valve (OCV)
• Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
• Damaged ECM

P006F is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P006F code for other Humber cars

You can view according P006F DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P006F Humber 12
• P006F Humber 14
• P006F Humber 16
• P006F Humber 6
• P006F Humber 9
• P006F Humber Hawk
• P006F Humber Imperial
• P006F Humber Pullman
• P006F Humber Sceptre
• P006F Humber Snipe
• P006F Humber Super
• P006F Humber Super Snipe

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved