C3808 Rover 2600 OBD Code

OBD/2 C3808 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

As the engine heats up and combustion becomes easier and more complete, the PCM will command the idling control valve to increase the amount of air entering the engine to suit the changing conditions. However, when the load on the engine changes, say, when some electrical consumers or other systems are either turned on or off, the PCM adapts the signal voltage to the idle control valve to ensure that the idling speed remains stable, and at the RPM specified by the manufacturer.

C3808 Rover 2600 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C3808 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If damper rr circuit failure so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the damper rr circuit failure.

Difficulty Level (Soso)

Repair Time (30 Min.)

Cost Prediction : $ 75-90

Common Causes of Rover 2600 C3808 OBD2 Code

A common cause of code C3808 is the failure of Damper RR Circuit Failure, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Damaged camshaft position (CMP) sensor
• Faulty Fuel injector
• 1Camshaft Position Sensor circuit poor electrical connection

C3808 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C3808 code for other Rover cars

You can view according C3808 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C3808 Rover 10
• C3808 Rover 100
• C3808 Rover 12
• C3808 Rover 14
• C3808 Rover 20
• C3808 Rover 200
• C3808 Rover 2000
• C3808 Rover 216
• C3808 Rover 220
• C3808 Rover 2200
• C3808 Rover 2300
• C3808 Rover 2400
• C3808 Rover 25
• C3808 Rover 3.5-litre
• C3808 Rover 3500
• C3808 Rover 3-litre
• C3808 Rover 400
• C3808 Rover 414
• C3808 Rover 420
• C3808 Rover 45
• C3808 Rover 60
• C3808 Rover 600
• C3808 Rover 75
• C3808 Rover 800
• C3808 Rover 825
• C3808 Rover Alvis
• C3808 Rover Ccv
• C3808 Rover City
• C3808 Rover City Rover
• C3808 Rover Land Rover
• C3808 Rover Metro
• C3808 Rover Mgf
• C3808 Rover Mini
• C3808 Rover Montego
• C3808 Rover P2
• C3808 Rover P4
• C3808 Rover P5
• C3808 Rover P5b
• C3808 Rover P6
• C3808 Rover Range Rover
• C3808 Rover Streetwise
• C3808 Rover T.3
• C3808 Rover Vitesse

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved