C3754 Simca 1300 OBD Code

OBD/2 C3754 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

As the engine heats up and combustion becomes easier and more complete, the PCM will command the idling control valve to increase the amount of air entering the engine to suit the changing conditions. However, when the load on the engine changes, say, when some electrical consumers or other systems are either turned on or off, the PCM adapts the signal voltage to the idle control valve to ensure that the idling speed remains stable, and at the RPM specified by the manufacturer.

C3754 Simca 1300 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C3754 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If lamp warning relay circuit failure so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the lamp warning relay circuit failure.

Difficulty Level (Soso)

Repair Time (30 Min.)

Cost Prediction : $ 75-90

Common Causes of Simca 1300 C3754 OBD2 Code

A common cause of code C3754 is the failure of Lamp Warning Relay Circuit Failure, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Intake air leaks
• Faulty starter motor

C3754 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C3754 code for other Simca cars

You can view according C3754 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C3754 Simca 1000
• C3754 Simca 11
• C3754 Simca 1100
• C3754 Simca 1200
• C3754 Simca 1301
• C3754 Simca 1307
• C3754 Simca 1308
• C3754 Simca 1309
• C3754 Simca 1500
• C3754 Simca 1501
• C3754 Simca 2 Litres
• C3754 Simca 5
• C3754 Simca 6
• C3754 Simca 8
• C3754 Simca Ariane
• C3754 Simca Aronde
• C3754 Simca Horizon
• C3754 Simca Montlhery
• C3754 Simca Oceane
• C3754 Simca Plein
• C3754 Simca Plein Ceil
• C3754 Simca Tufao
• C3754 Simca Type 11
• C3754 Simca Vedette
• C3754 Simca Vedette Beaulieu
• C3754 Simca Vedette Marly
• C3754 Simca Vedette Versailles

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved