C2926 Land Rover Discovery 2 OBD Code

OBD/2 C2926 error code description and symptoms.

Mass Air Flow (MAF) Sensor Intermittent The MAF sensor circuit is monitored by the PCM for sudden voltage (or air flow) input change through the comprehensive component monitor (CCM). If during the last 40 warm-up cycles in key ON engine running the PCM detects a voltage (or air flow) change beyond the minimum or maximum calibrated limit, a continuous memory diagnostic trouble code (DTC) is stored.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C2926 Land Rover Discovery 2 Error Code Repair Process :

If your seat driver rear up circuit open check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C2926 and engine control unit are in charge of monitoring a bunch of different seat driver rear up circuit open, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Land Rover Discovery 2 C2926 OBD2 Code

A common cause of code C2926 is the failure of Seat Driver Rear Up Circuit Open, but there are several other possible causes as well, such as ;

• Damaged camshaft position (CMP) sensor
• Exhaust tube
• Fuel pressure
• Ignition coils circuit poor electrical connection

C2926 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2926 code for other Land cars

You can view according C2926 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2926 Land Rover Defender
• C2926 Land Rover Discovery
• C2926 Land Rover Discovery 3
• C2926 Land Rover Discovery 4
• C2926 Land Rover Discovery 5
• C2926 Land Rover Evoque
• C2926 Land Rover Freelander
• C2926 Land Rover Freelander 2
• C2926 Land Rover Lr2
• C2926 Land Rover Lr3
• C2926 Land Rover Range Rover
• C2926 Land Rover Serie I
• C2926 Land Rover Series I
• C2926 Land Rover Series Ii
• C2926 Land Rover Series Iii
• C2926 Land Rover Velar

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved