C2457 Skoda 420 OBD Code

OBD/2 C2457 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C2457 Skoda 420 Error Code Repair Process :

If your gear 1 incorrect ratio check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C2457 and engine control unit are in charge of monitoring a bunch of different gear 1 incorrect ratio, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Skoda 420 C2457 OBD2 Code

A common cause of code C2457 is the failure of Gear 1 Incorrect Ratio, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Damaged camshaft position (CMP) sensor
• Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
• Damaged ECM

C2457 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2457 code for other Skoda cars

You can view according C2457 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2457 Skoda 1000
• C2457 Skoda 105
• C2457 Skoda 110
• C2457 Skoda 1100
• C2457 Skoda 120
• C2457 Skoda 1200
• C2457 Skoda 1201
• C2457 Skoda 1202
• C2457 Skoda 430
• C2457 Skoda 440
• C2457 Skoda 445
• C2457 Skoda 450
• C2457 Skoda Citigo
• C2457 Skoda Fabia
• C2457 Skoda Favorit
• C2457 Skoda Felicia
• C2457 Skoda Kamiq
• C2457 Skoda Karoq
• C2457 Skoda L
• C2457 Skoda Montreux
• C2457 Skoda Octavia
• C2457 Skoda Octavia I
• C2457 Skoda Octavia Ii
• C2457 Skoda Octavia Iii
• C2457 Skoda Polular
• C2457 Skoda Popular
• C2457 Skoda Praktik
• C2457 Skoda Rapid
• C2457 Skoda Roomster
• C2457 Skoda S
• C2457 Skoda Scala
• C2457 Skoda Superb
• C2457 Skoda Superb I
• C2457 Skoda Superb Ii
• C2457 Skoda Superb Iii
• C2457 Skoda Winnetou
• C2457 Skoda Yeti

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved