C2441 Rover 2200 OBD Code

OBD/2 C2441 error code description and symptoms.

Vehicle Speed Sensor (VSS) Intermittent Indicates the powertrain control module (PCM) detected an error in the vehicle speed information. Vehicle speed data is received from either the vehicle speed sensor (VSS), transfer case speed sensor (TCSS), anti-lock brake system (ABS) control module, generic electronic module (GEM), or central timer module (CTM). This DTC is set the same way as C2441. However, it is intended to flash the transmission control indicator lamp (TCIL) for first time VSS circuit error/malfunctions. Refer to possible causes for C2441

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C2441 Rover 2200 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C2441 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If turbo charge control circuit malfunction so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the turbo charge control circuit malfunction.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Rover 2200 C2441 OBD2 Code

A common cause of code C2441 is the failure of Turbo Charge Control Circuit Malfunction, but there are several other possible causes as well, such as ;

• EVAP system hose leaking
• Damaged camshaft position (CMP) sensor
• Continuous oil flow to the VCT piston chamber
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection

C2441 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2441 code for other Rover cars

You can view according C2441 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2441 Rover 10
• C2441 Rover 100
• C2441 Rover 12
• C2441 Rover 14
• C2441 Rover 20
• C2441 Rover 200
• C2441 Rover 2000
• C2441 Rover 216
• C2441 Rover 220
• C2441 Rover 2300
• C2441 Rover 2400
• C2441 Rover 25
• C2441 Rover 2600
• C2441 Rover 3.5-litre
• C2441 Rover 3500
• C2441 Rover 3-litre
• C2441 Rover 400
• C2441 Rover 414
• C2441 Rover 420
• C2441 Rover 45
• C2441 Rover 60
• C2441 Rover 600
• C2441 Rover 75
• C2441 Rover 800
• C2441 Rover 825
• C2441 Rover Alvis
• C2441 Rover Ccv
• C2441 Rover City
• C2441 Rover City Rover
• C2441 Rover Land Rover
• C2441 Rover Metro
• C2441 Rover Mgf
• C2441 Rover Mini
• C2441 Rover Montego
• C2441 Rover P2
• C2441 Rover P4
• C2441 Rover P5
• C2441 Rover P5b
• C2441 Rover P6
• C2441 Rover Range Rover
• C2441 Rover Streetwise
• C2441 Rover T.3
• C2441 Rover Vitesse

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved