C242F Simca Ariane OBD Code

OBD/2 C242F error code description and symptoms.

Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle. IMRC monitor signal circuit shorted to PWR GND or SIG RTN Damaged IMRC actuator Damaged PCM An IMRCM PID reading approximately near 1 volt at closed throttle may indicate a fault.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

C242F Simca Ariane Error Code Repair Process :

If your metering oil pump malfunction check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C242F and engine control unit are in charge of monitoring a bunch of different metering oil pump malfunction, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 40-75

Common Causes of Simca Ariane C242F OBD2 Code

A common cause of code C242F is the failure of Metering Oil Pump Malfunction, but there are several other possible causes as well, such as ;

• 1Camshaft Position Sensor circuit poor electrical connection
• Dirty Oil
• Improper ignition timing
• Faulty oil control valve (OCV)

C242F is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C242F code for other Simca cars

You can view according C242F DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C242F Simca 1000
• C242F Simca 11
• C242F Simca 1100
• C242F Simca 1200
• C242F Simca 1300
• C242F Simca 1301
• C242F Simca 1307
• C242F Simca 1308
• C242F Simca 1309
• C242F Simca 1500
• C242F Simca 1501
• C242F Simca 2 Litres
• C242F Simca 5
• C242F Simca 6
• C242F Simca 8
• C242F Simca Aronde
• C242F Simca Horizon
• C242F Simca Montlhery
• C242F Simca Oceane
• C242F Simca Plein
• C242F Simca Plein Ceil
• C242F Simca Tufao
• C242F Simca Type 11
• C242F Simca Vedette
• C242F Simca Vedette Beaulieu
• C242F Simca Vedette Marly
• C242F Simca Vedette Versailles

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved