C2393 Porsche Macan Type 95b OBD Code

OBD/2 C2393 error code description and symptoms.

Throttle Position (TP) Sensor Intermittent The TP sensor circuit is monitored by the PCM for sudden TP rotation angle (or voltage) input change through the comprehensive component monitor (CCM). If during the last 80 warm-up cycles in key ON engine running the PCM detects a TP rotation angle (or voltage) changes beyond the minimum or maximum calibrated limit, a continuous diagnostic trouble code (DTC) is stored. Poor continuity through the TP sensor connectors Poor continuity through the TP harness Intermittent open or short inside the TP sensor While accessing the TP V PID on the scan tool, lightly tap on the TP sensor or wiggle the TP sensor connector and harness.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

C2393 Porsche Macan Type 95b Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C2393 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If sbds interactive codes so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the sbds interactive codes.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 30-110

Common Causes of Porsche Macan Type 95b C2393 OBD2 Code

A common cause of code C2393 is the failure of SBDS Interactive Codes, but there are several other possible causes as well, such as ;

• Damaged VCT phaser
• Faulty starter motor
• Faulty Fuel injector
• Lack of fuel

C2393 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2393 code for other Porsche cars

You can view according C2393 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2393 Porsche 1300
• C2393 Porsche 3400
• C2393 Porsche 356
• C2393 Porsche 550
• C2393 Porsche 718
• C2393 Porsche 804
• C2393 Porsche 901
• C2393 Porsche 904
• C2393 Porsche 906
• C2393 Porsche 907
• C2393 Porsche 908
• C2393 Porsche 910
• C2393 Porsche 911
• C2393 Porsche 911 Type 991
• C2393 Porsche 911 Type 996
• C2393 Porsche 911 Type 997
• C2393 Porsche 912
• C2393 Porsche 914
• C2393 Porsche 917
• C2393 Porsche 924
• C2393 Porsche 928
• C2393 Porsche 930
• C2393 Porsche 931
• C2393 Porsche 935
• C2393 Porsche 936
• C2393 Porsche 937
• C2393 Porsche 944
• C2393 Porsche 959
• C2393 Porsche 962
• C2393 Porsche 964
• C2393 Porsche 965
• C2393 Porsche 968
• C2393 Porsche 986
• C2393 Porsche 993
• C2393 Porsche 996
• C2393 Porsche Boxster
• C2393 Porsche Boxster Type 981
• C2393 Porsche Boxster Type 986
• C2393 Porsche Boxster Type 987
• C2393 Porsche Carrera Gt
• C2393 Porsche Cayenne
• C2393 Porsche Cayenne Type 92a
• C2393 Porsche Cayenne Type 9pa
• C2393 Porsche Cayman
• C2393 Porsche Cayman Type 718
• C2393 Porsche Cayman Type 981
• C2393 Porsche Cayman Type 987
• C2393 Porsche Coupe
• C2393 Porsche Dp
• C2393 Porsche Gt
• C2393 Porsche Gt2
• C2393 Porsche Gt3
• C2393 Porsche Karisma
• C2393 Porsche Kremer
• C2393 Porsche Mega
• C2393 Porsche Panamera Type 970
• C2393 Porsche Panamericana
• C2393 Porsche Rsk
• C2393 Porsche Tapiro

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved