C2314 Ford Rs OBD Code

OBD/2 C2314 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

C2314 Ford Rs Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C2314 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If idle air control circuit malfunction so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the idle air control circuit malfunction.

Common Causes of Ford Rs C2314 OBD2 Code

A common cause of code C2314 is the failure of Idle Air Control Circuit Malfunction, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Engine Control Module (ECM)
Faulty Intake Valve Timing Control Solenoid Valve
Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection

C2314 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C2314 Ford Rs OBD Code

C2314 Ford Rs Error Code Repair Process :

Common Causes of Ford Rs C2314 OBD2 Code

C2314 code for other Ford cars