C2209 Lotus Exige S3 OBD Code

OBD/2 C2209 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

In most cases, the TCM is integrated into a single housing with the PCM. Nevertheless, the section of the module which controls (automatic) transmission function may be powered up separately. In any case, the TCM is typically powered using switched (only present with the ignition switch in the ON, start, or run position) voltage. This circuit is normally equipped with a fuse, fusible link, and/or a relay. Frequently, the PCM and TCM are powered using the same relay albeit by separate circuits. Access to a reliable vehicle information source will yield necessary details of the TCM power circuit for the specific vehicle in question.

C2209 Lotus Exige S3 Error Code Repair Process :

The scent may C2209 signal oil or coolant leaking from their normally closed-loop systems, or it may indicate dangerous exhaust gases invading your car's interior. Car and truck exhaust contains toxic gases such C2209, so if the inside of your car ignition spare as if you were standing behind your car, get out and get it fixed. Fight the urge to take a little nap first. So sleepy. That's the carbon monoxide talking, friends. At least open a window on your way to the shop.

Difficulty Level (Soso)

Repair Time (30 Min.)

Cost Prediction : $ 35-120

Common Causes of Lotus Exige S3 C2209 OBD2 Code

A common cause of code C2209 is the failure of Ignition Spare, but there are several other possible causes as well, such as ;

• Camshaft Position Sensor harness is open or shorted
• Faulty ignition coil (s)
• EVAP canister or fuel tank leaks
• Foreign matter caught in fuel filler cap

C2209 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2209 code for other Lotus cars

You can view according C2209 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2209 Lotus 11
• C2209 Lotus 16
• C2209 Lotus 25
• C2209 Lotus 2-eleven
• C2209 Lotus 33
• C2209 Lotus 340
• C2209 Lotus 49
• C2209 Lotus 72
• C2209 Lotus 79
• C2209 Lotus Carlton
• C2209 Lotus Eclat
• C2209 Lotus Elan
• C2209 Lotus Elise
• C2209 Lotus Elise 111r
• C2209 Lotus Elise S2 111s
• C2209 Lotus Elise S3
• C2209 Lotus Elise Sc
• C2209 Lotus Elite
• C2209 Lotus Emme
• C2209 Lotus Esprit
• C2209 Lotus Etna
• C2209 Lotus Europa
• C2209 Lotus Evora
• C2209 Lotus Excel
• C2209 Lotus Exige
• C2209 Lotus Extreme
• C2209 Lotus Gt
• C2209 Lotus M
• C2209 Lotus Seven
• C2209 Lotus Super
• C2209 Lotus Xi

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved