C1701 Ginetta G15 OBD Code

OBD/2 C1701 error code description and symptoms.

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. Cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) C1701 DTC is a check of the VCT unit.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

C1701 Ginetta G15 Error Code Repair Process :

For c1701 left rear sensor circuit fault check engine light is perhaps the most troubling of lights because it could mean so many different things, from you didn't screw the gas cap on tightly enough to look out for pistons flying through the hood and into the stratosphere. The easiest way to find out what this light is telling you is to hook your vehicle up to a scan tool. C1701 error code diagnostic tool looks a little like an oversized calculator and plugs into a communication port inside the car. After you instruct it to perform the scan, it speaks c1701 left rear sensor circuit fault with your car's computers to find out exactly what's prompting the light to turn on.

Difficulty Level (Expert)

Repair Time (35 Min.)

Cost Prediction : $ 70-120

Common Causes of Ginetta G15 C1701 OBD2 Code

A common cause of code C1701 is the failure of C1701 Left Rear Sensor Circuit Fault, but there are several other possible causes as well, such as ;

• Camshaft advance mechanism binding (VCT unit)
• Damaged ECM
• Fuel filler cap remains open or fails to close
• Engine Control Module (ECM)

C1701 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1701 code for other Ginetta cars

You can view according C1701 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1701 Ginetta G10
• C1701 Ginetta G11
• C1701 Ginetta G12
• C1701 Ginetta G2
• C1701 Ginetta G20
• C1701 Ginetta G21
• C1701 Ginetta G23
• C1701 Ginetta G25
• C1701 Ginetta G27
• C1701 Ginetta G3
• C1701 Ginetta G32
• C1701 Ginetta G33
• C1701 Ginetta G34
• C1701 Ginetta G4
• C1701 Ginetta G40
• C1701 Ginetta G5

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved