C1513 Land Rover Series I OBD Code

OBD/2 C1513 error code description and symptoms.

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. Cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) C1513 DTC is a check of the VCT unit.

As long as the throttle plate remains closed, the idling speed and quality is controlled by the PCM via the idle control valve, and as can be seen from the above it should be clear that idle control on a gasoline engine is a complex affair. For instance, if the engine is started in sub-zero temperatures, the PCM will command the idling control valve to allow less air to enter the engine to enrich the air/fuel mixture to create a condition which is roughly analogous to how chokes worked on carburetted engines to control idling in cold weather.

C1513 Land Rover Series I Error Code Repair Process :

If your vehicle failed a C1513 test and the C1513 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses c1513 left rear wheel pressure reduction performance problem a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look c1513 left rear wheel pressure reduction performance problem: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 20-50

Common Causes of Land Rover Series I C1513 OBD2 Code

A common cause of code C1513 is the failure of C1513 Left rear Wheel Pressure Reduction Performance Problem, but there are several other possible causes as well, such as ;

• Camshaft advance mechanism binding (VCT unit)
• Exhaust gas leaks
• Faulty Camshaft Position Sensor
• Fuel injectors may be faulty

C1513 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1513 code for other Land cars

You can view according C1513 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1513 Land Rover Defender
• C1513 Land Rover Discovery
• C1513 Land Rover Discovery 2
• C1513 Land Rover Discovery 3
• C1513 Land Rover Discovery 4
• C1513 Land Rover Discovery 5
• C1513 Land Rover Evoque
• C1513 Land Rover Freelander
• C1513 Land Rover Freelander 2
• C1513 Land Rover Lr2
• C1513 Land Rover Lr3
• C1513 Land Rover Range Rover
• C1513 Land Rover Serie I
• C1513 Land Rover Series Ii
• C1513 Land Rover Series Iii
• C1513 Land Rover Velar

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved