C1416 Chrysler Vision OBD Code

OBD/2 C1416 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

C1416 Chrysler Vision Error Code Repair Process :

If your c1416 rear speed sensor left output malfunction check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C1416 and engine control unit are in charge of monitoring a bunch of different c1416 rear speed sensor left output malfunction, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Chrysler Vision C1416 OBD2 Code

A common cause of code C1416 is the failure of C1416 Rear Speed Sensor Left Output Malfunction, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Faulty Mass Air Flow (MAF) sensor
Fuel injector leaks
Open circuits caused by damage to wiring.

C1416 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C1416 Chrysler Vision OBD Code

C1416 Chrysler Vision Error Code Repair Process :

Common Causes of Chrysler Vision C1416 OBD2 Code

C1416 code for other Chrysler cars