C1413 Ford V-8 OBD Code

OBD/2 C1413 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

C1413 Ford V-8 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C1413 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If c1413 traction control valve lf circuit short to battery so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the c1413 traction control valve lf circuit short to battery.

Common Causes of Ford V-8 C1413 OBD2 Code

A common cause of code C1413 is the failure of C1413 Traction Control Valve LF Circuit Short To Battery, but there are several other possible causes as well, such as ;

Camshaft Position Sensor harness is open or shorted
Engine Control Module (ECM)
Faulty Air Flow Meter
Foreign matter caught in fuel filler cap

C1413 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C1413 Ford V-8 OBD Code

C1413 Ford V-8 Error Code Repair Process :

Common Causes of Ford V-8 C1413 OBD2 Code

C1413 code for other Ford cars